Questa pagina è stata tradotta utilizzando Google Traduttore
Libreria delle specifiche delle apparecchiature
Informazioni di base sul modello
-
Produttore:American Augers
-
Modello:DD-185
-
Dimensione dell'attrezzatura:100,001 - 200,000 lbs pullback
Visualizza produttori Visualizza i modelli
Informazioni addizionali
DIMENSIONS IN WORKING POSITION
Weight: 58,600 lbs (26,636 kg)
Median pressure on the ground: 0.61 kg/cm2, 8 .63 psi
Drill Angle: 18°
Height: 16'6" (5,944 mm)
Width: 8'4-3/4" (2,559 mm)
Length: 48'6" (14,783 mm)
Add 60" (1,524 mm) when console is in working position
DIMENSIONS IN TRANSPORT POSITION
Height: 13'1" (3,988 mm)
Width: 8'4-3/4" (2,559 mm)
Length: 48'6" (14,783 mm)
ENGINE
Fuel: diesel fuel
Piston displacement: 10.5 L (638 cu.inch)
Power: 300 HP(224 kW)
Fuel tank capacity: 568L (150 U.S. Gallons)
Hours of operation per tankful: approximately 10 hours
Operating Temperature: Between -15°C and +40°C (+5°F and 105°F)
MAX ALTITUDE
6,500' (2,000 m) above sea level
ELECTRIC SYSTEM
Voltage: 24 volt DC start and run; 12 volt accessory
PERFORMANCE
Max. carriage speed: 29 m/min (95 FPM)
Rotary speed: 0—95 rpm
Drill angle: 10°-18°
NOISE LEVELS
Minimum safety distance 25'(8 m) from the nearest point of the machine
MINIMUM STORAGE SPACE REQUIRED
118 x 90", height 126" (level 3 x 15 m, height 3.2 m)
PROTECTION WHILE IN STORAGE
If the machine has been lubricated it can be stored in an exposed area up to 30 days. For storage periods more than 30 days place it in a covered and dry area. Level the storage site so that the tracks are fully supported. The surface must be able to support 58,000 lbs (26,300 kg).
STORAGE SITE ENVIRONMENT
Temperature allowed:
Between 0 and +50°C (32°F and 120°F). For temperatures between 0° and -40°C (32°F and -40°F), consult the manual
and follow the instructions for storage of the engine. Verify that there is no water or drilling fluid in the drilling fluid course and no water in the diesel fuel
and hydraulic oil tanks.
Weight: 58,600 lbs (26,636 kg)
Median pressure on the ground: 0.61 kg/cm2, 8 .63 psi
Drill Angle: 18°
Height: 16'6" (5,944 mm)
Width: 8'4-3/4" (2,559 mm)
Length: 48'6" (14,783 mm)
Add 60" (1,524 mm) when console is in working position
DIMENSIONS IN TRANSPORT POSITION
Height: 13'1" (3,988 mm)
Width: 8'4-3/4" (2,559 mm)
Length: 48'6" (14,783 mm)
ENGINE
Fuel: diesel fuel
Piston displacement: 10.5 L (638 cu.inch)
Power: 300 HP(224 kW)
Fuel tank capacity: 568L (150 U.S. Gallons)
Hours of operation per tankful: approximately 10 hours
Operating Temperature: Between -15°C and +40°C (+5°F and 105°F)
MAX ALTITUDE
6,500' (2,000 m) above sea level
ELECTRIC SYSTEM
Voltage: 24 volt DC start and run; 12 volt accessory
PERFORMANCE
Max. carriage speed: 29 m/min (95 FPM)
Rotary speed: 0—95 rpm
Drill angle: 10°-18°
NOISE LEVELS
Minimum safety distance 25'(8 m) from the nearest point of the machine
MINIMUM STORAGE SPACE REQUIRED
118 x 90", height 126" (level 3 x 15 m, height 3.2 m)
PROTECTION WHILE IN STORAGE
If the machine has been lubricated it can be stored in an exposed area up to 30 days. For storage periods more than 30 days place it in a covered and dry area. Level the storage site so that the tracks are fully supported. The surface must be able to support 58,000 lbs (26,300 kg).
STORAGE SITE ENVIRONMENT
Temperature allowed:
Between 0 and +50°C (32°F and 120°F). For temperatures between 0° and -40°C (32°F and -40°F), consult the manual
and follow the instructions for storage of the engine. Verify that there is no water or drilling fluid in the drilling fluid course and no water in the diesel fuel
and hydraulic oil tanks.
Questa informazione è fornita solo a scopo informativo. HDD Broker LLC non può garantire l'accuratezza o la completezza di queste informazioni. Queste informazioni sono soggette a modifiche da parte del produttore. Alcune specifiche possono variare a seconda dell'anno modello.